When you are programming manually, what is the most time-consuming part ?
Most of your time is spent in mathematical calculations of tangent and intersection points, points on a pit
ch circle, etc. CAM Lite does this job for you. It generates the program blocks for contouring tool motions and positioning blocks in hole machining operations. CAM Lite can be used to program Milling, Turning, Engraving, Flame cut, Laser cutting, Water jet cutting, Wire cut EDM, Routing, Sign making.
How CAM Lite works
• Draw the part shape through CAM Lite's CAD or import a DXF or IGES file.
• It automatically generates the NC program segments for these areas.
• Add F,S,T, M and depth commands in CAM Lite's editor.Your program is now ready
EXAMPLES
Engraving - To mill around the contour 
• Draw the contour or import a DXF or IGES file.
|
Program Red is generated by CAMlite. Green is added by you. % O145 G91 G28 Z0 T1 M6 G0 X66. Y80. G43 H1 Z3. M8 G00 Z-10. G00 X5.469 Y4.175 G02 X5.901 Y4.411 R10. G03 X6.12Y4.637 R0 X6.16 Y4.702 R1 G01 X6.204 Y4.828 X6.195 Y4.995 G02 X6.219 Y5.15 R0 X6.28 Y5.167 R0 G01 X6.388 Y5.189 G02 X6.528 Y5.172 R0 X6.654 Y5.136 R0 X6.817 Y5.083 R1 G01 X7.061 Y4.962 X7.111 Y4.931 ----- ----- ----- ----- G80 G0 Z3. M9 M5 G91 G28 Z0 M30 % |
Milling - To mill outside the contour and drill holes on the bolt hole circle
|
Program
Red is generated by CAMlite. Green is added by you. % O145 G91 G28 Z0 T1 M6 G0 X66. Y80. G43 H1 Z3. M8 G1 Z-6. F800. G01 G41 X166.622 Y67.163 G02 Y-67.163 R75. G01 X82.714 Y-25.464 G03 X54.363 Y-26.349 R30. G01 X25. Y-43.301 G02 Y43.301 R50. G01 X54.363 Y26.349 G03 X82.714 Y25.464 R30. G01 X166.622 Y67.163 G40 G0 X66. Y80. Z3. M9 M5 G91 G28 Z0 T2 M6 G00 X243.301 Y25. G43 H1 Z3. M8 G81 Z-16. R3. F300. X225. Y43.301 X200. Y50. X175. Y43.301 X156.699 Y25. X150. Y-0. X156.699 Y-25. X175. Y-43.301 X200. Y-50. X225. Y-43.301 X243.301 Y-25. X250. Y0. G80 G0 Z3. M9 M5 G91 G28 Z0 M30 % |
