CAPSmill CAD/CAM software for CNC milling programming
Increase your CNC milling profits

  • Much more than just CAD/CAM software
  • Reduce cycle time, machining cost
  • Eliminate trial part rejection
  • Maximize spindle power utilization
  • No dependence on skilled programmers
  • Get highly accurate cycle time for quotes
  • CNC milling programming with zero editing
  • Can be used by operators
  • Learning time 4 hours

Automatic safe path logic ensures zero collisions. You get parts first-time-right. The program generated by CAPSmill can be loaded on the machine and cut right away, without any editing. There is no machine downtime for program checking through single block and dry run.

Cycle time is dramatically reduced by automatic cutting parameters selection. Automatic tool nose radius compensation and gouge prevention ensure that you can take on parts with complex geometries, with no rejections caused by contour inaccuracies. An operator can do the programming, with just machining knowledge.

Just watch the 10 minute demo video to see the power and ease of use of CAPSmill CAD/CAM, and how it can improve the efficiency of your CNC milling programming, reduce cycle times and improve profits.

capsmill cad/cam software for cnc milling programming
CAPSmill

CAPSmill is shipped with all features bundled, with pre-configured tools and cutting database. You can start cutting parts from Day 1.

It comes with 1 postprocessor configured to your requirement. You can buy additional posts with CAPSmill, or any time later as you add more machines.

US $ 1500 / Rs. 1,00,000
Buy from your favourite store
          
capsmill lite cad/cam software for cnc milling programming
CAPSmill Lite

CAPSmill Lite is suitable if you want to do only CNC milling programming.
It is the same as CAPSmill, except that it does not have the features in the document menu.

If you buy CAPSmill Lite, you can upgrade any time later to CAPSmill.

US $ 750 / Rs.50,000
Buy from your favourite store
          

Feature   CAPSmill     CAPSmill Lite  
   Face, Contour, Pocket, Chamfer milling    
   Slot milling, Side slot milling, T-slot milling    
   Side slot milling, Helical boring    
   Automatic Tool nose radius compensation    
   Center drilling, Drilling, Peck drilling, Deep drilling    
   Rough boring, Finish boring, Combination hole drilling    
   Countersinking, Counterboring    
   Back spotfacing, Tapping, Reaming    
   Tool selection from industry-standard database    
   Auto cutting parameters selection    
   Auto collision check and prevention    
   Auto shortest safe tool path determination    
   Inbuilt CAD with import from other CAD software    
   Quick drawing of milling areas, hole patterns    
   ‘What you see is what you get’ simulation of tool path    
   Canned cycle output in CNC program    
   Add / Modify cutting tools, form tools, cutting parameters
   
   Add / Modify machine specific postprocessor    
   Cycle time calculation  
   Cycle time reduction  
   Tools list  
   Graphical process sheet – Tool Layout  
   Spindle power graph