General information
1 machine 
Drip-feed
Programs larger than the machine controller's memory can be executed in the drip feed mode if the controller is capable of drip feed execution.
Auto mode
The PC can be kept unmanned and program transfer initiated by the machine operator from the CNC machine.
2 machines
Auto restart after aborting
The last program block transferred to the machine is logged continuously. In case of an interruption in machining due to tool breakage or power failure, machining can be later resumed from the point at which it was interrupted.
Remote aborting
Drip feed program transfer can be aborted from the machine in case of emergencies like tool breakage.
Multiport serial card
4 machines
Smultaneous drip-feed
The PC can communicate simultaneously with more than one machine. Program transfer to any machine can be aborted without disturbing communication with the other machine.
Auto compare and save
Programs received at the PC from a machine are compared with their original versions, and are saved only if they have been altered on the machine.
Serial to WiFi devices
Choose your DNC
NCnet Lite 
DNC for 1 machine
- Connects 1 machine to the PC.
- Two way program between PC and CNC.
- Does NOT support drip-feed machining.
- Works through PC's COM ports.
NCnet X 1 
DNC for 1 machine
- Connects 1 machine to the PC.
- Supports drip-feed machining.
- Call programs remotely from machines.
- Auto restart after aborting.
- Remote aborting.
- Works through PC's COM ports.
NCnet X 2 
DNC for 2 machines
- Connects 2 machine to the PC.
- Supports simultaneous drip-feed machining.
- Call programs remotely from machines.
- Auto restart after aborting.
- Works through PC's COM ports.
NCnet X 4 
DNC for 4 machines
- Connects 4 machine to the PC.
- Supports simultaneous drip-feed machining.
- Auto restart after aborting.
- Call programs remotely from machines.
- Auto compare and save feature.
- Supports multi-port serial cards , serial to Wi-Fi devices.
NCnet X 8 
DNC for 8 machines
- Connects 8 machine to the PC.
- Supports simultaneous drip-feed machining.
- Auto restart after aborting.
- Call programs remotely from machines.
- Auto compare and save feature.
- Supports multi-port serial cards, serial to Wi-Fi devices.
NCnet X 16 
DNC for 16 machines
- Connects 16 machine to the PC.
- Supports simultaneous drip-feed machining.
- Auto restart after aborting.
- Call programs remotely from machines.
- Auto compare and save feature.
- Supports multi-port serial cards, serial to Wi-Fi devices.
NCnet X 32 
DNC for 32 machines
- Connects 32 machine to the PC.
- Supports simultaneous drip-feed machining.
- Auto restart after aborting.
- Call programs remotely from machines.
- Auto compare and save feature.
- Supports multi-port serial cards, serial to Wi-Fi devices.
NCnet for more than 32 machines
NCnet DNC program is also available for upto 128 machines. If you wish to purchase licenses to link more than 32 machines or have a special configuration, please contact us.
